Displaying the RPF peer information

Use the following procedure to display the MSDP peer information for a specific RP. The SA messages are received from the MSDP peer.

Procedure

Enter Privileged EXEC mode:

enable
Display the RPF peer information:

show ip msdp rpf {A.B.C.D} [vrf WORD<0-16>] [vrfids WORD<0-512>]

Example

Switch:#enable
Switch:1#show ip msdp rpf 172.16.10.13
============================================================================
                          MSDP RPF - GlobalRouter
===========================================================================
RPF peer information for (172.16.10.13)
RPF peer: (172.16.121.10)
RPF route/mask: 172.16.0.0/255.255.0.0
RPF rule: Peer is IGP next hop of best route
RPF type: unicast (ospf)

Variable definitions

The following table defines parameters for the show ip msdp rpf command.


Variable	Value
`{A.B.C.D}`	Specifies the RP IP address.
vrf `WORD<0–16>`	Displays configuration information for a particular VRF.
vrfids `WORD<0–512>`	Displays configuration information for a particular VRF ID.