Configure ExtremeCloud IQ Agent

Before you begin

You must first onboard the device and configure any optional IQ Agent parameters before you enable IQ Agent.

Procedure

In the navigation pane, expand Configuration > Serviceability.
Select IQAgent.
Select the Globals tab.
Configure optional parameters as required.
Select Apply.
Select Enable.
Select Apply.

Globals Field Descriptions

Use the data in the following table to use the Global tab to configure the ExtremeCloud IQ Agent.


Name	Description
Enable	Specifies whether IQ Agent is enabled. The default is enabled.
Version	Displays the ExtremeCloud IQ Agent firmware version running on the switch.
OperStatus	Displays the operational status of ExtremeCloud IQ Agent on the switch.
ServerAddressType	Specifies the address type of the ExtremeCloud IQ server address.
Server/Address	Specifies the ExtremeCloud IQ IPv4 address or DNS name. The default is hac.extremcloudiq.com.
ServerAddressOrigin	Specifies the origin for the ExtremeCloud IQ server address: none–not configured configured–manual configuration dhcp–obtained through DHCP
Address	Specifies the proxy IPv4 address or DNS name.
TcpPort	Specifies the TCP connection port.
UserName	Specifies the proxy server password.
Password	Specifies the proxy server username.
AssociationUrl	Displays the association URL of ExtremeCloud IQ.
PollUrl	Displays the poll URL of ExtremeCloud IQ.
MonitorFreq	Displays the monitoring frequency, in seconds, of ExtremeCloud IQ.
PollFreq	Displays the polling frequency, in seconds, of ExtremeCloud IQ.
LastOnboardTime	Displays the last onboard time of ExtremeCloud IQ.
LastPollStatus	Displays the last poll status of ExtremeCloud IQ.
LastPollTime	Displays the last poll time for a successful attempt.
LastMonitorStatus	Displays the last monitoring status of ExtremeCloud IQ.
LastMonitorTime	Displays the last monitor time for a successful attempt.
LastHealthStatus	Displays the last health status of ExtremeCloud IQ.
LastHealthTime	Displays the last health time for a successful attempt.