Viewing IP VRRPv3 Statistics
Use the following procedure to view IP VRRPv3 statistics to monitor network performance.
Procedure
Example
View IP VRRPv3 statistics:
Switch:1#show ip vrrp statistics
 
==========================================================================================
                        VRRP Global Stats - GlobalRouter
 
==========================================================================================
 
CHK_SUM_ERR   VERSION_ERR   VRID_ERR      VRRP_VERSION
------------------------------------------------------------------------------------------
0             0             0             2      
0             0             0             3      
 
=============================================================================================
                      VRRP Interface Stats - GlobalRouter
 
=============================================================================================
 
VRRP ID  P/V      BECOME_MASTER ADVERITSE_RCV VERSION
---------------------------------------------------------------------------------------------
3        3        1             0             2      
2        1/1      1             0             3      
 
VRRP ID  P/V      ADVERTISE_INT_ERR TTL_ERR       PRIO_0_RCV    VERSION
---------------------------------------------------------------------------------------------
 
3        3        0                 0             0             2      
2        1/1      0                 0             0             3      
 
VRRP ID  P/V      PRIO_0_SENT   INVALID_TYPE_ERR ADDRESS_LIST_ERR UNKNOWN_AUTHTYPE    VERSION
---------------------------------------------------------------------------------------------
3        3        0             0                0                0                   2      
2        1/1      0             0                0                0                   3      
 
VRRP ID  P/V      AUTHTYPE_ERR  PACKLEN_ERR   VERSION
---------------------------------------------------------------------------------------------
3        3        0             0             2      
2        1/1      0             0             3 
Variable Definitions
Use the data in the following table to use the ip vrrp version command.
| 
 Variable  | 
 Value  | 
|---|---|
| 
 version  | 
 Configures the VRRP version on the specified interface.  | 
| 
 <2–3>  | 
 Specifies the version of VRRP (2 or 3) to be configured on the specified interface.  | 
| 
 vrf WORD<1–16>  | 
 Specifies the name of the VRF.  | 
| 
 vrfids WORD<0–512>  | 
 Specifies the ID of the VRF, and is an integer in the range of 0–512.  |