Configure IP SPB Multicast Policy

Note

This procedure does not apply to XA1400 Series and VSP 8600 Series.

Before you begin

To perform this procedure on a non-default VRF, you must first change the VRF instance. For information about how to use EDM for a non-default VRF, see Select and Launch a VRF Context View. All parameters might not be available in non-default VRFs.

About this task

Perform this procedure to configure the IP SPB Multicast Policy on the switch.

Note

This functionality is not supported on IGMP snooping and DvR Leaf.

Multi-area SPB boundary nodes with remote IS-IS enabled do not support IP SPB Multicast Policy .

Procedure

In the navigation pane, expand Configuration > IP.
Select IP.
Select the Globals tab.
Select SpbMulticastPolicyEnable to enable this functionality.
In the SpbMulticastPolicyRmap field, type the route-map.
In the SpbMulticastPolicyApply field, select apply.