View the Local Link-State Database

Note

Note

This procedure does not apply to VSP 8600 Series.

About this task

View the link-local advertisements for each virtual interface in the link-state database.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select OSPF.
  3. Select the Local Lsdb tab.

Local Lsdb Field Descriptions

Use the data in the following table to use the Local Lsdb tab.

Name

Description

IpAddress

Specifies the IP address of the interface from which the link-state advertisement was received if the interface is numbered.

AddressLessIf

Specifies the interface index of the interface from which the LSA was received if the interface is unnumbered.

Type

Specifies the type of the link-state advertisement.

Lsid

Specifies the piece of the routing domain that the advertisement describes.

RouterId

Specifies the originating router in the Autonomous System.

Sequence

Identifies old and duplicate link-state advertisements.

Age

Specifies the age, in seconds, of the link-state advertisement.

Checksum

Contains the checksum of the complete contents of the advertisement, except for the age parameter. The checksum does not include the age parameter so that advertisement age increments without updating the checksum.

Advertisement

Specifies the size of the entire link-state advertisement.