Display Maximum EAP and NEAP Clients Configured on Auto-sense Enabled Ports

Note

This procedure does not apply to VSP 8600 Series and XA1400 Series.

About this task

Perform this procedure to display maximum number of EAP and NEAP clients configured on Auto-sense enabled ports.

Procedure

To enter User EXEC mode, log on to the switch.
Display maximum number of EAP and NEAP clients supported on Auto-sense enabled ports:
show auto-sense eapol multihost

Example

Display maximum number of EAP and NEAP clients configured on Auto-sense enabled ports.

Switch:1>show auto-sense eapol multihost
==========================================================================================
                            AUTO-SENSE EAPOL MULTIHOST Config
==========================================================================================
MAC-MAX         EAP-MAC-MAX     NEAP-MAC-MAX
------------------------------------------------------------------------------------------
2               2               2
------------------------------------------------------------------------------------------

------------------------------------------------------------------------------------------
 1 out of 1 Total Num of AUTO-SENSE entries displayed
------------------------------------------------------------------------------------------