The following table defines parameters for the show isis lsdb command.
|
Variable |
Value |
|---|---|
|
detail |
Displays detailed information about the IS-IS Link State database. |
|
home |
Displays the IS-IS LSDB information that the system configures in the home area. |
|
level {l1, l2, l12} |
Displays information on the IS-IS level. The IEEE 802.1aq standard currently only defines the use of one hierarchy, Level 1. Level 2 and combined Level 1 and 2 (l12) function is disabled. |
|
local |
Displays information on the local LSDB. |
|
lspid<xxxx.xxxx.xxxx.xx-xx> |
Specifies information about the IS-IS Link State database by LSP ID. |
|
remote |
Displays the IS-IS LSDB information that the system configures in the remote area. |
|
sub-tlv <1–3> |
Specifies information about the IS-IS Link State database by sub-TLV. |
|
sysid <xxxx.xxxx.xxxx> |
Specifies information about the IS-IS Link State database by System ID. |
|
tlv <1–236> |
Specifies information about the IS-IS Link State database by TLV. |